Home

MSHA Dredging

Aggregate Safety Series: Dredging Mine Safety and Health

  1. ing activity, an operation usually carried out at least partly underwater, with the purpose of extracting material from the bottom and then sending it to.
  2. istration 201 12th St S Suite 401 Arlington, VA 22202-5450 www.msha.gov TTY 202-693-940
  3. SHELL DREDGING: Mine Operator, Training for new employees, refresher training, and new task training can mean the difference between life and death for workers. Part 46 spells out how you can develop a training program to protect workers for on-the-job hazards

MSHA's Part 46 Training Regulations. Training and Retraining of Miners Engaged in Shell Dredging or Employed at Sand,Gravel, Surface Stone, Surface Clay, Colloidal Phosphate, or Surface Limestone Mines Version 3 - Published May 28, 2001. § 46.1 Scope. 1. Q. Are other commodities not listed in the title to this regulation covered under Part 46 Training and Retraining of Miners Engaged in Shell Dredging or Employed at Sand, Gravel, Surface Stone, Surface Clay, Colloidal Phosphate, or Surface Limestone Mines Version 3 - Published May 28, 2001. We developed this guide to provide information to the surface nonmetal mining community about the new Part 46 training regulations

Dredge Mine Safety and Health Administration (MSHA

Issued on October 28, 1997, under the provisions of Section 103(k) of the Mine Act prohibiting activity and work around the dredge until MSHA investigators determined the cause of the fatality and presence of any hazards. This order was terminated on October 29, 1997, upon completion of MSHA's investigation. Citation No. 770312 MSHA and OSHA will endeavor to develop compatible safety and health standards, regulations, and policies with respect to the mutual goals of the two organizations including joint rulemaking, where appropriate. hydraulicking and alluvial dredging. Minerals so excavated usually required upgrading processes to effect a separation of the. A fatal accident occurred at this operation on October 22, 2001, when the dredge operator fell from the dredge into the water and drowned. This order is to ensure the safety of all persons at this mine site. It prohibits the operation of the dredge until MSHA has determined that it is safe to resume normal operations in the area Join us online for the 2021 TRAM Virtual Summit, November 2-4, 2021. Information for operators and miners to minimize the spread of Coronavirus/COVID-19. Mine rescue teams compete in contests across the country to prepare themselves to operate effectively in a mine emergency. MSHA has a library of training videos on safety topics ranging from. MSHA was notified at about 3:30 p.m. on the day of the accident by a telephone call from the company personnel manager. An investigation was started the same day. The Ross Island Plant, a sand and gravel dredging operation, owned and operated by Ross Island Sand and Gravel Company, was located on the Wilamette River in Portland, Multnomah.

However, placer mining, dredging and creation of slurries for extraction are subject to MSHA. In such operations, minerals are suspended in liquids, but they are not converted to liquid form. Mine properties are not defined by metes and bounds, but rather by function On February 29, 2020, at 7:00 a.m., Spears arrived on the mine site and met with Hunter C. Jones, Loader Operator, to discuss working on a plugged dredge discharge pipe. Jones and Spears were the only miners on the site at the time of the accident. Paul D. Tupper, Dredge Operator, usually operated the dredge but he was not at the site One MSHA inspector with whom dredge safety problems were discussed expressed the view that all dredges must be required to have two boats, unless there is a dredge-to-shore walkway that can safely be used. The information from field visits made in this program certainly support this view 1. 103 (k) Order No. 944577 was issued to Dave Clinard Truck Service Inc., on March 3, 2021. A fatal accident occurred at this mine on March 5, 2021 when an excavator which a miner was operating slid down an elevated roadway and went into the lake the mine was dredging. This order is issued to assure the safety of all miners working on the. Johnathan Hall, MSHA's Approval and Certification Center Mechanical Engineer, arrived on April 16, 2019, to begin assessment of the condition of the suction dredge. Jordan Rose and Robert Bates, MSHA's Pittsburgh Safety and Health Technology Center Electrical Engineers arrived on April 30, 2019, to assess the electrical distribution system

MSHA - Part 46 Training Pamphlet - New Training

  1. ed it is safe to resume
  2. ing contracts and finding themselves with a need to train a group of employees quickly. If you're looking for MSHA in Spanish, call: 1-844-468-6742. Sign Up Not sure? Learn more. Or call 1-844-468-6742. Drift Widget
  3. es: sand, gravel, surface stone, surface clay, surface limestone, colloidal phosphate, or shell dredging operations
  4. operation under the jurisdiction of MSHA's Coal Mine Division rather than its Division of Metal and Nonmetal Mine Safety and Health. On September 8, 1988, in a civil penalty case against Respondent's predecessor-in-interest (Rivco Dredging Corporation), Commission Judge Maurer held that its dredging and preparation operations were covered by.
  5. e safety & health review commission washington, d.c. february 10, 1989 secretary of labor,

MSHA - Part 46 Training Assistance - Compliance Guideline

  1. In the year 2000, Congress exercised a continuing training resolution inserted in the Omnibus Budget Bill, prohibited MSHA from utilizing its budget to enforce the Part 48 training requirements at surface stone, surface clay, sand and gravel, surface limestone, colloidal phosphate, and shell dredging operations during this 20 year period
  2. ation of MSHA accident and injury statistics on dredge
  3. es. Miner: Any person, including any operator or supervisor, who works at a
  4. ers, supervisors, construction workers and independent contractors to begin work at a Part 46 surface
  5. istration (MSHA) Part 46 annual refresher requirements. Part 46 applies to shell dredging, sand, gravel, surface stone, surface clay, colloidal phosphate, and surface limestone
  6. MSHA PEL noise dose for sand and gravel workers. Worker Outside cab Number range of range of of recorded MSHA PEL of MSHA PEL Job title doses dose, % dose, % FEL operator 17 .19-51.83 27.21-244.31 Laborer/utility man 7 16.81-63.05 ND Dredge operator/trainee (CR 1) 7 2.32-10.74 ND Plant operator (CR) 6 1.72-10.45 N
  7. es, or shell dredging. This training will not satisfy Part 48 training requirements. If you are uncertain whether you are required to have Part 46 or Part 48 training, please contact the
Complete Guide to MSHA Part 46 Training Regulations | MSHA

MSHA Part 46 is the federal regulation that defines the mandatory requirements for training and retraining miners and other persons at shell dredging, sand, gravel, surface stone, surface clay, colloidal phosphate, and surface limestone mines Title 30 CFR Part 46 (MSHA Surface Miner Training) requires shell dredging, sand, gravel, surface stone, surface clay, colloidal phosphate, and surface limestone mines to have a training plan approved by the Department of Labor, Mine Safety and Health Administration

30 cfr part 46 - training and retraining of miners engaged in shell dredging or employed at sand, gravel, surface stone, surface clay, colloidal phosphate, or surface limestone mines The competent person or MSHA approved instructor can be either a mine employee or a non-employee trainer contracted by the mine to conduct the training. 3 - MSHA Enforcement of Part 46 vs Part 48. Overall, MSHA places more regulatory requirements and rigid enforcement on Part 48 than on Part 46 1 - The Miner. While MSHA defines the term miner very differently in Parts 46 and 48, ultimately, both parts share the concept that the miner is the person who is intended to receive the required training. In Part 46.2 Definitions, MSHA defines a miner as: Any person, including any operator or supervisor, who works at a mine and who. SPK Training & Compliance teaches the part 46 training rule requires shell dredging, sand, gravel, surface stone, surface clay, colloidal phosphate, and surface limestone mines to have a training plan approved by MSHA. What is MSHA? The Mine Safety and Health Administration's mission is to educate and enforce mandatory compliance

MSHA - Metal and Nonmetal Mine Safety and Health Fatal

Interagency Agreement Between the Mine Safety and Health

  1. istration (MSHA) states all
  2. istration (MSHA) supports, oversees, and enforces safety and training regulations for all U.S.
  3. istration (MSHA) requirements for Part 46
  4. er. This course is designed to meet MSHA Part 46 requirements. Part 46 applies to shell dredging, sand, gravel, surface stone, surface clay, colloidal phosphate, and surface limestone
  5. es such as gravel, sand, surface stones, shell dredging operations, and so on. Through convenient online MSHA training, surface
  6. eral dredging operations, such as

MSHA - Metal and Nonmetal Mine Fatal Accident

Mine Safety and Health Administration (MSHA) Protecting

  1. es. This is more site specific and taught by a competent person assigned by the
  2. Part 46 pertains to Sand, Gravel, Stone, Crushed Stone, Limestone, Clay,Shell Dredging, and Colloidal Phosphate Mining surface operations. This training is available on demand only. Part 48 pertains to All Other Surface and Underground Mining Operations. If not listed above, it is under Part 48. GETTING THE MSHA CERTIFICATE 5000-2
  3. A: Dredge America's employees are trained at least quarterly on new technology, safety, environmental protection, OSHA and MSHA training, customer and public relations, and productivity improvement methods
  4. eral
  5. Learning modules in our Part 46 Annual Refresher Training Course include: Each module is followed by a quiz, and the course ends with a final exam. Students have an unlimited number of attempts to pass the quizzes and final exam. After you pass the final exam, you can instantly download a U.S. Department of Labor Certificate of Training (MSHA.
About Us | Carter Dredging II, Inc

A miner trained under Part 46 will not be considered trained for a mine site that falls under Part 48, the miner will be considered a New Miner with no experience. However, our training plans in many cases are nearly identical for Part 46 and some Part 48 mines, so depending on the situation, some training can overlap Material Handling, Dredge & Mining Hoses. Continental hoses are frequently used in above-ground and underground mining applications, in offshore technology, in material handling, large-tank units, the ironworks industry, and the building trade. Our robust hoses are known for their top functionality and long service life The MSHA's rules are under Title 30, Volume 1, Chapter 1, Parts 1-99. Each of the 99 parts contain a different topic in MSHA rules. Part 46 is Training and Retraining of Miners Engaged in Shell Dredging, or Employed at Sand, Gravel, Surface Stone, Surface Clay, Colloidal Phosphate, or Surface Limestone Mines MSHA, alleging he was disciplined and ultimately terminated for engaging in protected activity regarding his safety concerns and his safety violation. MSHA declined to pursue the discrimination claim on Thomas's behalf, and Thomas filed a Section 105(c)(3) action with the Commission, which CalPortland contested. After a hearing MSHA Training - 40 Hour Part 48 New Miner Training MSHA Training Part 48 is designed to meet training requirements under title 30 CFR Part 48 Subpart B '48.Training under Part 48 is designated for any person working in a surface mine or surface areas of an underground

MSHA's Helpdesk: (877) 778-6055. Educational Field and Small Mine Services. New EGov Users Registration. The Mine Safety and Health Administration (MSHA) Training Plan Advisor provides guidance to help mine owners and operators develop their Federally required training plans. In some cases, independent contractors must develop their own. MSHA Part 46 applies to very specific surface mines, such as sand, gravel, surface stone, surface clay, surface limestone, colloidal phosphate, or shell dredging operations. On the other hand, MSHA Part 48 covers all underground mines, surface coal mines, and some surface/non-metal mines Part 46 applies to shell dredging, sand, gravel, surface stone, surface clay, colloidal phosphate, and surface limestone mines. Mines must offer this safety and awareness refresher training to persons performing all types of mining activities in MSHA Part 46 operations and to contractors who have frequent or extended exposures during. This course is designed to assist you in meeting Mining Safety and Health Administration (MSHA) Part 46 annual refresher requirements; specifically under 46.4 (d). Part 46 applies to shell dredging, sand, gravel, surface stone, surface clay, colloidal phosphate, and surface limestone mines. Mine Dredging. C&M Dredging has an extensive background in mining and material recovery, C&M dredging can work with your operation to offer solutions to your mine dredging opportunities. Our staff is MSHA trained and certified and comfortable operating within the environment of todays mining operations. Our typical contract dredging projects.

Containing 12 sections, Part 46 defines the requirements for training and retraining miners and other persons at shell dredging, sand, gravel, surface stone, surface clay, colloidal phosphate, and surface limestone mines.. The 12 sections that comprise Part 46 include: 46.1 - Scope. 46.2 - Definitions PART 46 - TRAINING AND RETRAINING OF MINERS ENGAGED IN SHELL DREDGING OR EMPLOYED AT SAND, GRAVEL, SURFACE STONE, SURFACE CLAY, COLLOIDAL PHOSPHATE, OR SURFACE LIMESTONE MINES. § 46.2 Definitions. 30 CFR § 46.2 - Definitions. (MSHA). (p) You means production-operators and independent contractors. [64 FR 53130, Sept. 30, 1999,.

We have worked in a variety of industrial and municipal dredging situations including nuclear power facilities, municipal power plants, industrial manufacturing facilities and mines. All of our dredging crews are OSHA and Red Cross trained and MSHA certified Expert witness on mine safety issues.Per 30 CFR Part 46.2(e), if you are a person, partnership, corporation, subsidiary of a corporation, firm, association, or other organization that contracts to perform services at a shell dredging, sand, gravel, surface stone, surface clay, colloidal phosphate, or surface limestone mine, then you need Part 46 training and all the associated documentation

Aggregates Safety Series: Small Mines Mine Safety and

Dredging Safety Checklist. Dredge Yard continuously investigates and develops dredging equipment that is reliable, durable and eco-friendly. We strive to reduce environmental footprint and increase efficiency to achieve high quality equipment at the lowest cost for the client and the environment. However, dredging operations can also be risky. Dredging and filling in the surface waters of Florida has been regulated since the early 1970s. This program was established under Chapter 403, F.S., to protect our surface waters from degradation caused by the loss of wetlands and from pollution caused by construction activities. Alteration of wetlands and other surface waters may have a.

MSHA or OSHA? : Pit & Quarr

(a) You must record and certify on MSHA Form 5000-23, or on a form that contains the information listed in paragraph (b) of this section, that each miner has received training required under this part. (b) The form must include: (1) The printed full name of the person trained; (2) The type of training, the duration of the training, the date the training was received, the name of the competent. Product Description. The complete MSHA Title 30 CFR Code of Federal R egulations Desk Reference Spiral Bound Book. Contains all of the Mine Safety and Health Administration (MSHA) regulations in this edition that apply to both coal, metal and nonmetal mines. The Desk Reference is a republication of the Government Printing Office's code of federal regulations title 30 CFR with some very.

Carter Dredging II, Inc

APC 5000-23 MSHA Certificate of Training book features 25, 4-part NCR carbon copy MSHA 5000-23 forms (100 pages total) and a wrap-around back flap to keep forms from transferring. Each MSHA form has 4 individual color parts: white - Employer's Personnel Record, pink - Employee's Record Copy, yellow - Employee's Separation Copy and green copy. MSHA does not have authority once the vessel is loaded/unloaded and is underway. Likewise, MSHA authority extends to barges and vessels used in mineral dredging operations, such as mining sand and gravel from underwater deposits, and includes the loading/unloading of such barges/vessels. Trainin

Our MSHA Part 46 Surface Miner Refresher Training Course is designed to meet all MSHA requirements. MSHA Part 46 regulations require that workers complete a minimum of 8 hours of refresher training on an annual basis. Part 46 applies to shell dredging, sand, gravel, surface stone, surface clay, colloidal phosphate, and surface limestone mines MSHA Training. 30CRF Part 46 and 48. Training and re-training of miners (and mine contractors) Part 46 training is for sand, gravel, surface stone, clay, limestone, shell dredging, and colloidal phosphate mines. Part 48 training is appropriate for all other types of mining, including underground operations.. Part 46 applies to shell dredging, sand, gravel, surface stone, surface clay, colloidal phosphate, and surface limestone mines. If your work is in other MSHA regulated operations or you are an independent contractor that operates in other types of mining operations, you may be required to complete Part 48 training instead Dredging is an aggregate mining activity, an operation usually carried out at least partly underwater, with the purpose of extracting material from the bottom and then sending it to the shore by pipelines or pontoon-mounted conveyor belts. Check out the dredging safety video (MSHA DVD 644) by clicking here MSHA Part 46 regulations require that New Miners complete a minimum of 24 hours of training within their first 90 days of employment, 4 hours of which must be completed prior to beginning work at the mine. Our MSHA New Miner Training offers over 8 hours of training that was created to meet the training subject requirements in 30 CFR 46.5

APC 5000-23 MSHA Certificate of Training book features 25, 4-part NCR carbon copy forms (100 pages total) and a wrap-around back flap to keep forms from transferring. Each form has 4 individual color parts: white - Employer's Personnel Record, pink - Employee's Record Copy, yellow - Employee's Separation Copy and green copy for Record Keeping 0:00 / 5:30. Live. •. With the Trump administration releasing an updated regulatory agenda, Ogletree Deakins' Margo Lopez joins Pit & Quarry to discuss the latest Mine Safety & Health Administration (MSHA) rulemaking - including MSHA's approach to respirable crystalline silica and powered haulage equipment safety MSHA Part 46 is part of miner training that deals with documentation requirements at certain mines. Specifically, it applies to miners who are involved in shell dredging or those hired to work in sand, gravel, limestone, colloidal phosphate or surface clay mines. In other words, MSHA Part 46 applies to non-metal, non-coal surface minds

Tailings pond dredging involves the removal of sediments from any body of water. It can be useful for creating new waterways, maintaining existing waterways for improved navigation, preparing areas for future construction projects, removing contaminants or simply making water healthier Training Plan for Part 48 Mines (including Placer) 30 CFR Part 48 requires mine operators to develop and submit to MSHA a training plan that outlines their company's procedure for training miners. We've attached a blank, interactive form that you can use to develop your plan. This plan does NOT apply to shell dredging, sand, gravel, surface. The Mine Safety Training Program provides high quality safety instruction to mine employees in New York State. It is a grant program funded by the Mine Safety and Health Administration (MSHA) since 1979. The program is designed to train workers in the surface nonmetal mining industry. Every training program we present follows MSHA recommended. MSHA Part 46 is a section of Title 30 Code of Federal Regulations, 30 CFR, which defines health and safety rules and compliance requirements for non-metal and non-coal surface mines. Mines that produce coal, metals, and other commodities through underground operations are governed by MSHA's Part 48 regulations with significantly more. MSHA Part 46 Refresher Training Course. This course is designed to assist you in meeting Mining Safety and Health Administration (MSHA) Part 46 annual refresher requirements. Part 46 applies to shell dredging, sand, gravel, surface stone, surface clay, colloidal phosphate, and surface limestone mines. If your work is in other MSHA regulated.

MSHA Part 46 Training Plan Template OSHA Education Center. Training Oshaeducationcenter.com All Courses ››. MSHA Part 46 Training Plan Template. Our free template walks you through the process of creating an official Part 46 training plan.Simply work your way through the document and fill in the blanks to provide a comprehensive overview of training procedures at your mine We are dedicated to the environment and helping to reduce contaminants in the water through responsible dredging processes. Our Qualities Our employees are trained through Mine Safety and Health Administration (MSHA) and we are a drug free company Our new-miner training course addresses the initial 24-hour training requirements of the MSHA provisions called Part 46 and Part 48. Part 46 training pertains to surface-mining operations for sand, gravel, stone, crushed stone, limestone, clay, shell dredging, and colloidal (soft rock) phosphate mining

MSHA works cooperatively with industry, labor, and other Federal and state agencies to improve safety and health conditions for all miners in the United States. Consulting Services include requested training and retraining of miners and other persons at shell dredging, sand, gravel, surface stone, surface clay, colloidal phosphate, and surface. Well sounds like your in tune with Msha, so you can get the screen running. The excavator you already have so that would be the machine I'd go with for now. Your feed system will be more important than your dredging system at this point. Like stonebreaker says you have to know what the market in your area need and us for materials More specifically the MSHA refresher grace period for the Annual Refresher Training, certification is valid for one year from the end of the month the training was completed in. So the MSHA Refresher grace period for refresher training completed on April 15th is good until April 30th of the following year Designed With Accessory Features: Line Power 15 KV, 600 Amp Vacum Load Break Switch. High Shock Voltmeter And Switch. Ammeter And Ammeter Switch For Each Output Circuit. Pennsylvania Approval Package. High Voltage Coupler Wrench And Mounting Bracket. Schedule 80, 3 Pipe Bumper On Each End Of Switch-House U.S. Department of Labor | Mine Safety and Health Administration (MSHA) | 201 12th Street South | Arlington, VA 22202 www.msha.gov | TTY | Telephone: (202) 693-940

Final Report - Mine Safety and Health Administration (MSHA

The company's founder, Festus A. Carter, was awarded a U.S. Patent in 1981 for the invention and design of a machine (in barge form) to suppress foam on detergent-contaminated bodies of water. Our employees are trained thru Mine Safety and Health Administration (MSHA) annually. Carter Dredging is a drug free company. Our Philosophy The KMI Academy online MSHA Part 46 Training course is a full application safety and health educational platform, featuring safety and health training for people of all technical abilities. Participants of our offerings will be able to more readily identify, mitigate, and prevent common safety risks within daily obligations

Dredge Safety - 911 Metallurgis

The 8-hour MSHA program covers the annual training requirements for owners and operators under 30 CFR parts 46 & 48 (companies training under Part 46 must have an approved training plan). If you are an owner or employee of shell dredging, sand, gravel, surface stone, surface clay, colloidal phosphate, and surface limestone mines, you must. View Msha Part 48 PPTs online, safely and virus-free! Many are downloadable. Learn new and interesting things. Get ideas for your own presentations. Share yours for free The 360Training MSHA Mining Training Module contains 27 courses, including the 8 hours required for compliance training in Part 46 of the MSHA. 360 Training MSHA New Miner Review If you are a surface miner or subcontractor, start your new job with the best education available. According to Part 46 of the MSHA provisions, new minors must. MSHA Part 46 Training Plan Template OSHA Education Center. You can include additional information about company-specific policies for safety training, such as mandatory training for site-specific hazards.Improving Mine Safety Through Effective Training Mining deaths in the United States have declined drastically since 1977, when the Mine Safety and Health Administration (MSHA) was created to.

MSHA Mandatory Training MSHA Part 48b Surface New Miner (24 Hours) This hybrid course is structured to meet the requirements of MSHA Part 48b Surface New Miner training.This course is intended for the contractor or mine employee that needs the full 24 hours of Part 48b training covering all the mandatory subjects required by MSHA The Mine Safety and Health Administration (MSHA) has issued a new final rule aimed at improving the effectiveness of safety inspections within the mining industry. The rule goes into effect on May 23, and will introduce new requirements to better safeguard the safety and health of miners in metallic and non-metallic (MNM) mines across the country

March 5, 2021 Fatality - Final Report Mine - msha

Today's MSHA. April 2012 by Chris Ralph. We all know that it was never Congress' intent to regulate gold panners and other individual mine operators through MSHA. In fact, I believe the concept of owner-operated mines with no employees was so strange a concept to the lawmakers that they never even thought there would be a need for such an. ARLINGTON, VA - The U.S. Department of Labor's Mine Safety and Health Administration (MSHA) has awarded $10,537,000 in grant funding to support safety and health courses, and other programs.MSHA awarded grants to 46 states, the Navajo Nation, Guam, and the Commonwealth of the Northern Mariana Islands. Grantees will use the funds to provide miners with federally mandated training Dredging Positions Available. (Lithia, FL) Dredging Company with work in several Mosaic Facilities looking for experienced Operators, Boatman, Deckhands, Welders, and Mechanics. MSHA/Florida Phosphate Producer a plus. Must pass Background Check/Drug Test and have a valid Drivers License. DFW/EOE Press Rentals, LLC is an innovative, expert-led hydraulic dredging and dewatering company servicing the contiguous United StatesEagle Dynamic Solutions, LLC offers world-class services in hydraulic dredging, separations, beneficial reuse and raw materials, materials handling and in-plant services, along with transportatio

Mine Dredging - C&M Dredging

MSHA - Metal/Nonmetal Mine Fatal Accident Investigation

Specialties: Located in Southeast Georgia Carter Dredging Company, Inc. is an independently owned business established in August of 1970. We specialize in waterborne problems by use of Cutter-Suction Dredges. Our primary service is dredging and the aspects of dredging, but is not limited to this alone. The company's founder Festus A. Carter was awarded a U.S. Patent in 1981 for the invention. Overview: Direct and coordinate all phases of rock and sand production including dredging, conveying, processing, shipping and yard operations. The main duties include optimizing production through proper planning, minimizing downtime through proper maintenance practices, managing costs and providing strong leadership to plant employees with a strong emphasis on safety, quality and. Also, within the last couple of years, PLP won a landmark Federal case we affectionately call The Cheerios Decision, the importance of which is explained in the accomplishments list below. Very early in the 1990's, PLP and some individual miners worked together in good faith with the state of California to craft the 1994 Suction Dredge.

SAE 100R1AT Single Steel Wire Braided Hose-News-Industrial

MSHA Training Onlin

President and Owner of LT Environmental. 2016 - Present, Started LT Environmental as owner and president of corporation.Handling all corporate and financial affairs. 2014 - 2016, Executive Assistant to the Owner and Onsite Administrative Representative under the Project Manager on a $15 Million dredging and dewatering project in Los Angeles, CA..

Protection Spiral Guards & Sleeves | TBH Industrial & MarineMarine Environmental Remediation | San Francisco Bay